How To Connect To A Lan Network In Windows 7

Connexion and transfer of data are some of the invaluable uses of a computer. A lot of technology has arisen from this dire need. Between computers, one effective method is via the use of Ethernet or LAN cables. Here we walk you lot through all the steps to establish a LAN cable connexion between two Windows x PCs for file-sharing or data transfer.

Advantages of LAN Cable Connection

One of the primary advantages with connecting two Windows 10 laptops or computers is that it provides a medium to share files when you lot don't have admission to a wireless network.

If you exercise non trust the available Wi-Fi network, then you lot can make use of a LAN cable to connect the Windows 10 PCs and share files between them. The process is simple, and you just demand to connect both the PCs with LAN cable and tweak a few network settings. It is a prissy way to share files locally.

Choosing Between Straight or Crossover Cables

To know which cables will get the piece of work washed, you should offset make up one's mind which devices y'all want to connect: are they the same kind of devices (two computers, for example) or dissimilar kinds of devices (a computer to a network switch or Ethernet hub, for case).

When two like systems share files, i outputs the data while the other receives it as input. Intentionally crossed wiring in the crossover cable connects the transmit signals at one end to the receiver signals at the other stop. This makes crossover cables more than platonic for an Ethernet connexion betwixt similar systems, like two computers.

How to Connect Ii Windows 10 PCs with a LAN Cable

With a crossover cablevision in manus, connect both the PCs. In one case washed, follow the steps below.

1. Become to "Control Console -> Network and Cyberspace -> Network and Sharing Middle -> Change Adapter Settings."

2. Click on "Change Adapter Settings." This volition reveal different connections. Select the advisable connection for your LAN. Usually, merely non necessarily, the connection volition exist called Ethernet.

3. Right-click on the connection and select "Properties." The local area's connexion properties window will appear.

4. Nether the network tab, select "Internet protocol version four (TCP/IPv4)," and then click on "Properties."

In the Properties menu, ready the IP address and subnet masks of the outset computer to:

• IP – 192.168.0.1
• Subnet Mask – 225.225.225.0

Echo all the above steps for the 2d computer and set the IP address and subnet Mask equally follows:

• IP – 192.168.0.2
• Subnet Mask – 225.225.225.0

Note: if you want the local network and Cyberspace to work simultaneously, and then ensure that under Adapter Settings you have de-selected IP Ver 6 for all devices. Also reset the IP Address to "find automatically."

5. Later on assigning the IP addresses, you need to head back to Network and Sharing Center and click on the "Change advanced sharing settings" option.

6. In the advanced sharing settings menu, you demand to enable the "Plow on network discovery" and "Turn on automatic setup of network-connected devices" options.

You can besides tick the File and printer sharing option. This would permit the other Windows 10 PC to access the files and printers shared on the network.

seven. Right-click on "This PC" and cull "Properties." Click on "Change settings -> Modify." This reveals a window with the name of the workgroup. The value for the workgroup name should be the aforementioned for both PCs. By default, the workgroup proper name will be WORKGROUP, but you tin change it to any proper noun you like.

8. Right-click on the drive y'all desire to share. Curl to the "Give admission to" selection and click "Advanced Sharing." Nether the sharing tab, click the "Avant-garde Sharing" push.

This reveals the advanced sharing window. Check the "Share this folder" checkbox and click "Apply -> OK."

At this stage, you will have successfully connected the two Windows 10 PCs to share your drives between them.

Transferring Files

You can at present transfer specific folders or files betwixt the two connected Windows ten PCs. To share specific folders or files from Computer A (ADMIN-HP) with Computer B, follow the steps below:

1. Correct-click the desired folder or file in Computer A. Scroll to the "Give admission to" selection and click "Specific People."

two. In the newly opened Network Access windows, select "Anybody" from the drib-downwards card. Adjacent, click "Add together" and click "Share."

three. Similarly on Calculator B, y'all need to open This PC and click on the Network option in the left pane. Here you lot will see the names of connected computers, part of the network. In this case, Estimator A is ADMIN-HP. Double-click on it and all files shared volition be displayed. At this phase, you lot can use the normal copy and paste to move the desired content.

4. If you wish to copy files from Calculator B to Computer A, you have to perform the same steps, but this time the steps previously performed on Figurer A needs to be performed on Reckoner B and vice versa.

Wrapping Upwards

The above method will permit you to connect two Windows 10 PCs with a LAN cable to transfer files. For more sharing options, acquire how to share files between Android and Windows 10 on your network.

Is this article useful?

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Source: https://www.maketecheasier.com/connect-two-windows-computer-on-lan/

Posted by: albanesethenteavill.blogspot.com

Share this post